"$solvethermalddcc" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$solvethermalddcc enable the thermal solver to use the heat source from the DDCC solver. The heat source in each elemenent will be <math> heatsource = \vec{E} \c...") |
|||
| 行 2： | 行 2： | ||
<math> heatsource = \vec{E} \cdot J </math> |
<math> heatsource = \vec{E} \cdot J </math> |
||
| + | |||
| + | The method to enable the ddcc would be |
||
| + | |||
| + | $ifsolveheat |
||
| + | |||
| + | $solvethermalddcc |
||
| + | |||
| + | $Boundary |
||
| + | 3 |
||
| + | 123 1 300.0 |
||
| + | 221 1 400.0 |
||
| + | 224 2 22.3 |
||
| + | |||
| + | $Thermalcoe |
||
| + | 1 1.5 0.0 |
||
| + | 2 1.5 0.0 |
||
| + | 3 1.5 0.0 |
||
| + | 4 1.5 0.0 |
||
於 2024年9月6日 (五) 14:43 的修訂
$solvethermalddcc enable the thermal solver to use the heat source from the DDCC solver. The heat source in each elemenent will be
The method to enable the ddcc would be
$ifsolveheat
$solvethermalddcc
$Boundary 3 123 1 300.0 221 1 400.0 224 2 22.3
$Thermalcoe 1 1.5 0.0 2 1.5 0.0 3 1.5 0.0 4 1.5 0.0
