"$xnode" 修訂間的差異

於 2024年10月21日 (一) 17:08 的修訂

The x-coordinate for each x node. The number of rows (n) depends on the function $xsecysecmaxob.

• Unit: μm

Format

$xnode
x1
x2
 .
 .
 .
xn

Example

$xsecysecmaxob 
    3    5    2 

$xnode
    0.0000
    1.1000
   10.0000

It means the 1^st x-point is at 0.0 (μm); the 2^nd is at 1.1 (μm); and the last is at 10.0 (μm).

The $xnode setting in GUI interface is here
1. Press Mesh Setting and choose Manual mesh.
2. Choose X-node point and set the 1st X-point to 0.0 (μm).


3. Continue set the 2nd X-point to 1.1 (μm).


4. Continue by setting the last X-point to 10.0 (μm).


5. Get 3 X-nodes!

Related commands

$xnode, $ynode, $xd, $xdiv, $xgradualdiv, $ygradualdiv, $ydiv,$ynode