"$gatebias" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "To determine the bias added to the gate contact. It should be written in one row with three numbers which represent the start of the bias voltage the end of the bia...") |
|||
| 行 8： | 行 8： | ||
This means that the bias of the gate contact will starts at 0V and increases 0.1V every step until the gate bias reached 0.4V. <br> |
This means that the bias of the gate contact will starts at 0V and increases 0.1V every step until the gate bias reached 0.4V. <br> |
||
i.e. -0.3 -0.2 -0.1 0 0.1 0.2 0.3 |
i.e. -0.3 -0.2 -0.1 0 0.1 0.2 0.3 |
||
| + | |||
| + | <br> |
||
| + | [[$drainbias]], [[$sourcebias]] |
||
於 2017年8月14日 (一) 21:30 的修訂
To determine the bias added to the gate contact.
It should be written in one row with three numbers which represent the start of the bias voltage the end of the bias voltage and the step size of the voltage in sequence.
For example:
$gatebias -0.3 0.3 0.1
This means that the bias of the gate contact will starts at 0V and increases 0.1V every step until the gate bias reached 0.4V.
i.e. -0.3 -0.2 -0.1 0 0.1 0.2 0.3
