「$usemubydopeT」:修訂間差異
跳至導覽
跳至搜尋
無編輯摘要 |
無編輯摘要 |
||
| 第14行: | 第14行: | ||
Type | Type | ||
0: Use the original nonradiative lifetime defined in parameter setions | 0: Use the original nonradiative lifetime defined in parameter setions | ||
1: <math> \mu_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \mu_{p} = \ | 1: <math> \mu_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \mu_{p} = \mu_{n} </math> | ||
2: <math> \ | 2: <math> \mu_{n} = p1 \times (\frac{T}{p5}) ^{p3} </math> , and <math> \mu_{n} = p2 \times (\frac{T}{p5}) ^{p4} </math> | ||
3: <math> \ | 3: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = \tau_{n} </math> | ||
4: <math> \ | 4: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}}{p7}) ^{p8}} \right) </math> | ||
13: <math> \ | 13: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math> | ||
24: <math> \ | 24: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and | ||
<math> \ | <math> \mu_{p,0} = p7 + \left(\frac{P8-P7}{1+(\frac{N_{d}}{p9}) ^{p10}} \right) </math>, <math>\mu_{p} = \tau_{p,0} \times (\frac{T}{p11}) ^{p12} </math>. | ||
If the mobility is for activated dopant density then | If the mobility is for activated dopant density then | ||
31: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = \mu_{n} </math> | 31: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = \mu_{n} </math> | ||
41: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}^{- | 41: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}^{-}}{p7}) ^{p8}} \right) </math> | ||
131: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \mu{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math> | 131: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \mu{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math> | ||
241: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \mu_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and | 241: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \mu_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and | ||
<math> \mu_{p,0} = p7 + \left(\frac{P8-P7}{1+(\frac{N_{a}^{-}}{p9}) ^{p10}} \right) </math>, <math>\mu_{p} = \mu_{p,0} \times (\frac{T}{p11}) ^{p12} </math>. | <math> \mu_{p,0} = p7 + \left(\frac{P8-P7}{1+(\frac{N_{a}^{-}}{p9}) ^{p10}} \right) </math>, <math>\mu_{p} = \mu_{p,0} \times (\frac{T}{p11}) ^{p12} </math>. | ||
於 2018年5月23日 (三) 02:21 的修訂
$usemubydopeT is to enable the temperature and carrier density dependent mobility module with the predefined function. The function is designed for each region. So if total n regions is used, then you will need to setup n regions. The format is
$usemubydopeT Type_R1 p1 p2 p3 p4 p5.....p12 Type_R2 p1 p2 p3 p4 p5.....p12 Type_R3 p1 p2 p3 p4 p5.....p12 ... ... ... Type_RN p1 p2 p3 p4 .....p12
Type
0: Use the original nonradiative lifetime defined in parameter setions
1: , and
2: , and
3: , and
4: , and
13: , , and
24: , , and
, .
If the mobility is for activated dopant density then
31: , and
41: , and
131: , , and
241: , , and
, .