$usetaunrbyfunc

$usetaunrbyfunc is to enable the temperature and carrier density dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if total n regions is used, then you will need to setup n regions. The format is

$usetaunrbyfunc
Type_R1  p1 p2 p3 p4 p5.....
Type_R2  p1 p2 p3 p4 p5.....
Type_R3  p1 p2 p3 p4 p5.....
...
...
... 
Type_RN  p1 p2 p3 p4 .....

Type

0: Use the original nonradiative lifetime defined in parameter setions
1: ${\tau }_n=p1\times (\frac{T}{p3}{)}^{p2}$ , and ${\tau }_p={\tau }_n$
2: ${\tau }_n=p1\times (\frac{T}{p5}{)}^{p3}$ , and ${\tau }_n=p2\times (\frac{T}{p5}{)}^{p4}$
3: ${\tau }_n=p1+\left(\frac{P2-P1}{1+(\frac{N_d}{p3}{)}^{p4}}\right)$ , and ${\tau }_p={\tau }_n$
4: ${\tau }_n=p1+\left(\frac{P2-P1}{1+(\frac{N_d}{p3}{)}^{p4}}\right)$ , and ${\tau }_p=p5+\left(\frac{P6-P5}{1+(\frac{N_a}{p7}{)}^{p8}}\right)$
13: ${\tau }_{n,0}=p1+\left(\frac{P2-P1}{1+(\frac{N_d}{p3}{)}^{p4}}\right)$,  ${\tau }_n={\tau }_{n,0}\times (\frac{T}{p5}{)}^{p6}$ , and ${\tau }_p={\tau }_n$