$opertemp

出自 DDCC TCAD TOOL Manual
於 2024年9月22日 (日) 21:58 由 Xijun (對話 | 貢獻) 所做的修訂

前往: 導覽搜尋

$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature

Example

$opertemp
300.0

This means the reference temperature is 300K.


The $opertemp setting in GUI interface is here
Press the Contact Setting and fill in the field of the Temperature(K)!
2D opertemp fig1.jpg