$vshift
出自 DDCC TCAD TOOL Manual
於 2017年8月15日 (二) 13:48 由 Jameshuang (對話 | 貢獻) 所做的修訂 (已建立頁面，內容為 "vshift is used to shift the reference voltage from 0 to -15v. This function is not important after we overcome the operation voltage limitation. '''<big><big>examp...")
vshift is used to shift the reference voltage from 0 to -15v. This function is not important after we overcome the operation voltage limitation.
example
$vshift -10.0
This example make the reference 0 v to be -10.0v. But the program will shift back the voltage after the calculation is finished.
