$dirrecombine
出自 DDCC TCAD TOOL Manual
於 2017年8月15日 (二) 18:37 由 Jameshuang (對話 | 貢獻) 所做的修訂 (已建立頁面，內容為 "Setting the B0 recombination coefficient of each layer. If the material has n-layers you need to set B0 for each layer. <br /> <big><big>'''Format'''</big></big><br...")
Setting the B0 recombination coefficient of each layer. If the material has n-layers you need to set B0 for each layer.
Format
$dirrecombine b_1 b_2 b_3 ... b_n
Example
$dirrecombine 2.00e-11 2.00e-11 2.00e-11 2.00e-11 2.00e-11
