$RCWArefractiveindex
出自 DDCC TCAD TOOL Manual
於 2020年6月16日 (二) 10:29 由 DDCC-3D (對話 | 貢獻) 所做的修訂 (已建立頁面，內容為 "The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in $RCWAxdiv. It also needs to goes with the $RCWAxdiv a...")
The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in $RCWAxdiv. It also needs to goes with the $RCWAxdiv and $RCWAperiod to define number of boundary point and the period of simulation domain. The left boundary point does not need to assign which automatically set as -2/period.
$RCWArefractiveindex
[n_{1,1} n_{1,2} n_{1,3}]-lambda1 [n_{1,1} n_{1,2} n_{1,3}]-lambda2 layer1 - Nlambda * xdiv [n_{2,1} n_{2,2} n_{2,3}]-lambda1 [n_{2,1} n_{2,2} n_{2,3}]-lambda2 layer2 - Nlambda * xdiv ... total layer
