@DEAD TIME
出自 DDCC TCAD TOOL Manual
於 2024年9月23日 (一) 14:02 由 Sufei2 (對話 | 貢獻) 所做的修訂 (已建立頁面，內容為 "*The recovery time after the detector detects a photon event. During this period, even if a photon appears, it cannot be detected. If @SPD_NUM is larger then one...")
- The recovery time after the detector detects a photon event. During this period, even if a photon appears, it cannot be detected. If @SPD_NUM is larger then one, list them separated by ",".
- Is store as dead_time in the fortran code.
example
@DEAD_TIME 10000000, 10000000
Which mean the system has two detector, and their dead time are 10000000(ps).
