$opertemp
出自 DDCC TCAD TOOL Manual
於 2017年8月14日 (一) 21:11 由 Yrwu (對話 | 貢獻) 所做的修訂 (已建立頁面，內容為 "$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature For Example: $opertemp 300.0 This means the reference tempera...")
$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature
For Example:
$opertemp 300.0
This means the reference temperature is 300K.
