$ifapplyAugerofT

$ifapplyAugerofT is to enable the temperature-dependent Auger coefficient module with the predefined function. The function is designed for each region. So if total n regions are used, then you will need to set up n regions. The format is

$ifapplyAugerofT
p1 p2 p3 
p1 p2 p3 
p1 p2 p3 
...
...
... 
p1 p2 p3 

$Auger-C = p1 \times (\frac{T}{p3}) ^{p2}$ 
p1:  AugerC at 300K