「$ifapplymuofT」：修訂間差異

於 2024年11月22日 (五) 10:18 的最新修訂

$ifapplymuofT is to activate temperature-dependent mobility setting.

$ifapplymuofT
p1 p2 p3 p4 p5.....p6
p1 p2 p3 p4 p5.....p6
p1 p2 p3 p4 p5.....p6
...
...
... 
p1 p2 p3 p4 .....p6

Type

  $μ_{n} = p 1 \times {(\frac{T}{p 3})}^{p 2}$  , and  $μ_{p} = p 4 \times {(\frac{T}{p 6})}^{p 5}$ 
 p1 is the  $μ_{n} (300 K)$ 
 p4 is the  $μ_{p} (300 K)$

The $ifapplymuofT setting for 1D-DDCC in GUI interface

The parameters are modified in Step 4.

The related commands are: $ifapplytauofT, $ifapplymuofT, $ifapplyEgofT, $ifTversusJ

@@ 第1行： / 第1行： @@
-$ifapplymuofT  is to activate temperature dependent mobility.
+$ifapplymuofT  is to activate temperature-dependent mobility setting.
-The formalism would be
-$usemubydopeT  is to enable the temperature and carrier density dependent mobility module with the predefined function. The function is designed for each region.
-So if total n regions is used, then you will need to setup n regions. The format is
   $ifapplymuofT
@@ 第15行： / 第13行： @@
 Type
- <math> \mu_{n} = p1 \times \left(\frac{T}{p3}\right) ^{p2} </math> , and <math> \mu_{p} = p4 \times \left(\frac{T}{p6}\right) ^{p5} </math>
+  <math> \mu_{n} = p1 \times \left(\frac{T}{p3}\right) ^{p2} </math> , and <math> \mu_{p} = p4 \times \left(\frac{T}{p6}\right) ^{p5} </math>
+  p1 is the <math> \mu_{n} (300K)  </math>
+  p4 is the <math> \mu_{p} (300K)  </math>
+<big>'''The $ifapplymuofT setting for 1D-DDCC in GUI interface '''</big> <br>
+The parameters are modified in '''Step 4'''.<br>
+[[檔案:1d_$ifapplymuofT_fig1.jpg|1300px]]<br>
+The related commands are:  [[$ifapplytauofT]], [[$ifapplymuofT]], [[$ifapplyEgofT]], [[$ifTversusJ]]

「$ifapplymuofT」：修訂間差異

於 2024年11月22日 (五) 10:18 的最新修訂

導覽選單

搜尋