「$ifapplytauofT」：修訂間差異
跳至導覽
跳至搜尋
已建立頁面，內容為 "$ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if tot..." |
無編輯摘要 |
||
| （未顯示由 1 位使用者於中間所作的 3 次修訂） | |||
| 第1行： | 第1行： | ||
$ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. | $ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. | ||
So if total n regions | So if total n regions are used, then you will need to set up n regions. The format is | ||
$ | $ifapplytauofT | ||
p1 p2 p3 p4 p5.....p6 | p1 p2 p3 p4 p5.....p6 | ||
p1 p2 p3 p4 p5.....p6 | p1 p2 p3 p4 p5.....p6 | ||
| 第9行： | 第9行： | ||
... | ... | ||
... | ... | ||
p1 p2 p3 p4 .....p6 | |||
<math> \tau_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \tau_{p} = p4 \times (\frac{T}{p6}) ^{p5} </math> | <math> \tau_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \tau_{p} = p4 \times (\frac{T}{p6}) ^{p5} </math> | ||
<big>'''The $ifapplytauofT setting for 1D-DDCC in GUI interface '''</big> <br> | |||
The parameters are modified in '''Step 4'''.<br> | |||
[[檔案:1d_$ifapplytauofT_fig1.jpg|1300px]]<br> | |||
The related commands are: [[$ifapplytauofT]], [[$ifapplymuofT]], [[$ifapplyEgofT]], [[$ifTversusJ]] | |||
於 2024年11月22日 (五) 10:20 的最新修訂
$ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if total n regions are used, then you will need to set up n regions. The format is
$ifapplytauofT p1 p2 p3 p4 p5.....p6 p1 p2 p3 p4 p5.....p6 p1 p2 p3 p4 p5.....p6 ... ... ... p1 p2 p3 p4 .....p6
, and
The $ifapplytauofT setting for 1D-DDCC in GUI interface
The parameters are modified in Step 4.
The related commands are: $ifapplytauofT, $ifapplymuofT, $ifapplyEgofT, $ifTversusJ