"$UseAuger" 修訂間的差異
出自 DDCC TCAD TOOL Manual
Jameshuang (對話 | 貢獻) (已建立頁面，內容為 "ㄔhis function is to consider the auger recombination in the device. fill in the auger recombination coefficient of each layer. format $useauger 1st layer layer...") |
Jameshuang (對話 | 貢獻) |
||
| 行 1： | 行 1： | ||
| − | + | This function is to consider the auger recombination in the device. fill in the auger recombination coefficient of each layer. |
|
| − | format |
||
| + | <big><big>'''format'''</big></big> |
||
$useauger |
$useauger |
||
1st layer layer's auger coefficient |
1st layer layer's auger coefficient |
||
| 行 9： | 行 9： | ||
nth layer layer's auger coefficien |
nth layer layer's auger coefficien |
||
(Unit cm^6 s) |
(Unit cm^6 s) |
||
| − | example |
||
| + | <big><big>'''example'''</big></big> |
||
$useauger |
$useauger |
||
8.0e-031 |
8.0e-031 |
||
於 2017年8月15日 (二) 12:54 的修訂
This function is to consider the auger recombination in the device. fill in the auger recombination coefficient of each layer.
format
$useauger 1st layer layer's auger coefficient 2nd layer layer's auger coefficient 3rd layer layer's auger coefficient . . . nth layer layer's auger coefficien (Unit cm^6 s)
example
$useauger 8.0e-031 8.0e-031 8.0e-031
