$ifapplytauofT

$ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if total n regions are used, then you will need to set up n regions. The format is

$ifapplytauofT
p1 p2 p3 p4 p5.....p6
p1 p2 p3 p4 p5.....p6
p1 p2 p3 p4 p5.....p6
...
...
... 
p1 p2 p3 p4 .....p6

$\tau_{n} = p1 \times (\frac{T}{p3}) ^{p2}$ , and $\tau_{p} = p4 \times (\frac{T}{p6}) ^{p5}$

The related commands are: $ifapplytauofT, $ifapplymuofT, $ifapplyEgofT, $ifTversusJ