2D LED View the results

● Press the result viewer button

● 2D Result SOP

1. Choose the project name
2. Choose the data type
IV And IQE (Usually Use)
2D Node-Base Data (Usually Use)
2D Element-Base Data
2D Ray Tracing
2D Triangular Mesh
2D Node Parameter Check (Usually Use)
2D Element Parameter Check
2D Nsum Data
2D Eigen Wave
2D RCWA Choose the x-axis and y-axis data
3. Choose the figure type
x-y plot
2D triangular mesh
Plot the complete data for both the x-axis and y-axis
Plot along the y-axis at a fixed x-point
Plot along the x-axis at a fixed y-point
3D triangular mesh
5. Hold on (if necessary)
6. Plot
Notice: Remember to normalize the 2D current density by the chip width (cm) when plotting current data.