$UseAuger
出自 DDCC TCAD TOOL Manual
於 2017年8月15日 (二) 12:54 由 Jameshuang (對話 | 貢獻) 所做的修訂
This function is to consider the auger recombination in the device. fill in the auger recombination coefficient of each layer.
format
$useauger 1st layer layer's auger coefficient 2nd layer layer's auger coefficient 3rd layer layer's auger coefficient . . . nth layer layer's auger coefficien (Unit cm^6 s)
example
$useauger 8.0e-031 8.0e-031 8.0e-031
