"$heatbndistance" 修訂間的差異
出自 DDCC TCAD TOOL Manual
| (未顯示由 1 位使用者於中間所作的 1 次修訂) | |||
| 行 11： | 行 11： | ||
$heatbndistance |
$heatbndistance |
||
| − | 500.0e |
+ | 500.0e-4 |
This means the thermal boundary condition ([[$contact]] is assigned 91) has a heat absorbing boundary at the distance of 500um. |
This means the thermal boundary condition ([[$contact]] is assigned 91) has a heat absorbing boundary at the distance of 500um. |
||
| + | |||
| + | <br>'''<big><big>The $heatbndistance setting in GUI interface is here</big></big>''' <br> |
||
| + | Check the box and fill in the field for '''abc distance (cm)''' as needed!<br> |
||
| + | [[檔案:2D_heatbndistance_fig1.jpg|1200px]] |
||
於 2024年10月2日 (三) 21:46 的最新修訂
$heatbndistance is the command to assign the heat absorbing boundary distance.
The format is
$heatbndistance distance(cm)
For example
$heatbndistance 500.0e-4
This means the thermal boundary condition ($contact is assigned 91) has a heat absorbing boundary at the distance of 500um.
The $heatbndistance setting in GUI interface is here
Check the box and fill in the field for abc distance (cm) as needed!
related commands:
$heatsource, $timeevolve, $usechannelaveT, $heatiterative, $thermaldiff
$maxTlimit, $useevversusT, $heatbndistance, $heatsolvebytime
